Vehicle Compatibility

• Nissan Micra 0.9 IG-T (HR09DET) 2016-
• Nissan Qashqai II 1.2T (HRA2DDT) 2014-
• Renault Captur 0.9 TCe (H4BT) 2015-
• Renault Captur 1.2 TCe (H5FT) 2015-
• Renault Clio IV 0.9 TCe (H4BT) 2013-
• Renault Clio IV 1.2 TCe (H5FT) 2015-
• Renault Kadjar 1.2 TCe (H5F408) 2016-
• Renault Megane III 1.2 (H5F404) 2013-
• Renault Megane IV 1.2 T (H5F408) 2015-
• Renault Sandero 0.9 TCe (H4BT) 2014-

Important: Customer must select the correct ring size (STD, 020/0.50, or 040/1.00).

This kit is for 4 cylinders, for a 3 cylinder kit, refer to:

3 Cylinder Kit

Specifications

• Part Type: Piston Ring Set (For 4 Cylinders)
• Cylinder Bore: 72.20 mm
• Available Sizes (Customer Must Select):
• STD (Standard)
• 020 / 0.50
• 040 / 1.00
• Ring Set Thicknesses (Component Numbers):
• Component 1: 1.20 mm
• Component 2: 1.50 mm
• Component 3: 2.00 mm

Features

• Designed to restore compression and oil control on rebuilds
• Matched ring thickness set for correct piston groove fitment
• Four-cylinder pack for correct quantity ordering
• Multiple sizes available to suit standard or rebored engines

Why Buy From Us

• Nationwide delivery across South Africa
• 12-month warranty (subject to correct fitment and application)
• Fitment assistance available—share your VIN/engine code for verification

Installation & Maintenance Tips

• Measure bore size and confirm required oversize (STD, 0.50, or 1.00) before selecting your option
• Check piston ring end-gap in the cylinder and adjust per workshop specification
• Hone cylinders correctly and clean thoroughly to prevent premature wear
• Install rings in the correct orientation and stagger ring gaps per workshop spec
• Follow correct run-in procedure and use the correct oil grade after rebuild

Engine Parts Installation Warning

Internal engine parts must be installed by a qualified workshop. Correct measurement, machining checks, cleanliness, lubrication, and torque procedures are critical. Incorrect installation or poor preparation can cause severe engine damage. Verify bore size, clearances, ring end-gaps, and engine code before fitment.

Engine Parts Return Policy Warning

Opened or unsealed internal engine parts are non-returnable unless the incorrect item was supplied and the product remains unused and sealed in its original packaging. Please confirm specifications and application before opening.